Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateMedeco Locksmith in Ontario, CA | Greystone Locksmith
We provide independent Medeco locksmith service across Ontario, CA, handling everything from rekeying restricted cylinders to freeing heat-seized deadbolts on older tract homes. What makes our Medeco work different here is simple: we know how Ontario’s dry inland air and painted-over doors punish high-security hardware, and we service what’s already on your door, not what we’d rather sell you. Call (866) 497-9415 for a Medeco locksmith in Ontario who actually works on Medeco locks day in and day out.
Why Ontario Residents Choose Us for Medeco Service
Medeco locks aren’t something you hand to a generalist and hope for the best. Their restricted keyways and hardened pins behave differently than a Kwikset or Schlage, and a tech who doesn’t work on Medeco regularly will waste your time and maybe your cylinder. We work on Medeco hardware across Ontario, from Maxum deadbolts on 1950s bungalows near downtown to Medeco service in Montclair and commercial mortise cylinders on Holt Blvd storefronts. We’re not authorized by Medeco and we don’t claim to be. We’re an independent shop that pins, rekeys, and repairs these cylinders often enough to know them cold.
Gil Tanner, our owner, built his reputation across the Inland Empire on residential rekeying and commercial high-security installs, including Medeco in Upland. When a Medeco cylinder comes across our bench, it gets the same unhurried, specific attention he’s given locks for the better part of three decades. We’ll tell you when a rekey beats a replacement, and we won’t upsell you on hardware you don’t need. If you’re in the 91764 or 91761 ZIP codes, we’re close by and ready when the heat does its worst.
Styles & brands we work with
Common Medeco Locksmith Problems We Solve in Ontario
- Dry, galled cylinder pins that bind. Ontario’s dusty, low-humidity air works its way into Medeco cylinders over the years. The fine grit settles on pins and side-bar assemblies, and the key starts to stick, then refuses to turn. We strip, clean, and re-pin these cylinders with OEM-spec brass pins and springs, restoring the smooth indexing Medeco is known for.
- Restricted side-bar assemblies that stop indexing cleanly. After enough heat cycles and grit, the rotating-pin and side-bar mechanism in an M3+ platform cylinder can hang up. The key inserts fully but won’t rotate to the shear line. That’s not a key problem. It’s a cylinder-internals problem, and we fix it on site in most Ontario calls.
- Door and strike misalignment on older wood doors. Ontario’s mid-century tracts have wood doors that swell and shrink with the seasons. When a door settles out of square, it puts lateral load on a Medeco deadbolt, wearing the bolt face and stressing the cylinder housing. We realign, reinforce the strike, and make the deadbolt throw clean again.
- Paint-sealed escutcheons and faceplates on older tract homes. This is probably the most Ontario-specific Medeco failure we see. Decades of repainting around downtown and along Holt Blvd has left countless exterior Medeco cylinders sealed, sticky, and sometimes completely immobile. The cylinder is fine underneath. The paint and sun-baked hardware around it isn’t.
- Worn keys on restricted keyways. Medeco keys are cut on controlled blanks, but they still wear. A worn restricted key chews at the tumbler pins and accelerates cylinder wear. If you have a working Medeco key, we can cut duplicates and re-pin to fresh keys when the cylinder needs it.
Medeco Service in Ontario: What Local Conditions Mean for Your Equipment
Ontario’s older tracts near downtown and along Holt Blvd share a specific problem: original single-cylinder deadbolts that have been painted over so many times the escutcheon and faceplate are sealed to the door. On a Medeco cylinder, that means the plug itself is often fouled, not just sticky. The key goes in but won’t turn because paint has crept into the restricted keyway, or the hardened plug has seized against the sun-baked housing. On a rental just off Holt Blvd, our tech answered a ‘key won’t turn’ call on a Medeco Maxum deadbolt where years of repainting had sealed the escutcheon and a bone-dry, dusty cylinder had started to gall. We freed and cleaned the plug, re-pinned the cylinder to a fresh restricted key for the new tenant, and added a reinforced strike so the swollen door wouldn’t keep loading the bolt sideways. That’s not a generic Medeco repair. That’s Ontario-specific wear, and it’s the kind of call we see at least once a week in the 91764 and 91798 ZIP codes.
A lock is only as good as the installation behind it. In Ontario, where summer heat warps doors and the dry air works through lubricant faster than coastal climates, that installation takes more abuse than most. We approach every Medeco service call with that in mind.
Medeco Models & Products We Service in Ontario
We service the Medeco Maxum residential deadbolt, the classic Medeco original high-security cylinder and M3+ platform, Medeco repair in Chino, commercial mortise and rim cylinders on panic-bar doors, and Medeco KeyMark restricted-keyway deadbolts common in Ontario’s rental and multi-unit properties. We pin and repair genuine Medeco cylinders with OEM-spec pins and springs whenever the cylinder body is sound. Where a Medeco replacement isn’t practical, we use quality aftermarket deadbolts and escape hardware, and we’ll say plainly when that’s the right call versus a repair. We keep common Medeco pin kits, springs, and service parts stocked for fast turnaround across Ontario, so most cylinder repairs happen in a single visit.
For the full picture of our brand coverage, see our Medeco sales & service page.
Medeco Service Pricing in Ontario
Medeco service in Ontario typically runs $150 to $350 for most residential cylinder repairs and rekeys, depending on whether we’re re-pinning an existing cylinder, cutting new restricted keys, or adding hardware like reinforced strikes. Commercial Medeco work, including mortise and rim cylinders on panic-bar doors, usually falls between $200 and $500 per opening because of the extra hardware and keying complexity. What drives the cost is cylinder condition and how many key copies you need, not hidden add-ons. We quote the full price on the phone before we dispatch anyone, and that’s the price on the invoice. Call (866) 497-9415 for an exact Medeco estimate in Ontario. Estimates are free.
- Residential Medeco rekey or cylinder repair: $150 – $300
- Medeco deadbolt replacement with reinforced strike: $180 – $350
- Commercial Medeco mortise or rim cylinder service: $200 – $500 per opening
- New restricted Medeco key copies: Quoted per key, based on keyway and quantity
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well, and we also provide Medeco in San Antonio Heights. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Medeco Locksmith in Ontario
In most cases, yes. The original Medeco key card makes ordering new key blanks straightforward, but if you’ve lost the card, we can often decode the existing key, verify the keyway, and re-pin the cylinder to fresh restricted keys from our stock. If the cylinder is a proprietary institutional keyway we don’t have blanks for, we’ll tell you plainly and work on the best alternative. Call (866) 497-9415 and we’ll sort out what your specific Medeco keyway needs.
Two main culprits in Ontario. First, the dry, dusty air works grit into the rotating pins and side-bar assembly until the cylinder binds. Second, heat-warped doors load the deadbolt sideways so the bolt can’t retract cleanly. We fix both: clean and re-pin the cylinder, realign the door, and reinforce the strike so the bolt stops binding. Call (866) 497-9415 for a Medeco service call in Ontario.
We repair whenever the cylinder body and bolt are sound, which covers most Medeco deadbolts we see in Ontario. Re-pinning a good cylinder costs less and keeps your original high-security hardware in service. If the housing is cracked, the bolt is worn, or a replacement is simply cheaper long-term, we’ll tell you that too and show you the numbers before any work starts.
Yes. We service Medeco mortise and rim cylinders mounted on panic-bar doors across Ontario’s commercial and industrial buildings. That includes re-pinning, new keying systems for tenant turnover, and cylinder replacement when the hardware has reached the end of its service life. We quote a flat per-opening price with a written scope before we start.
No. We’re an independent locksmith shop serving Ontario, not a Medeco authorized dealer or partner. We service Medeco locks because they’re on doors all over this city and because we work on them constantly, not because of any manufacturer relationship. What that means for you is honest advice on repair versus replacement, without a sales quota behind it.
Service Areas Near Ontario
We service Ontario and the surrounding Inland Empire communities, including Riverside, Rubidoux, Sunnyslope, Pedley, Woodcrest, and Highgrove. If you’re in a nearby neighborhood with Medeco hardware, we’re close. See our Ontario service area page for coverage details. We also provide Medeco service in Meadowbrook and Medeco service in Mentone for customers just outside the city.
Book Your Medeco Service in Ontario Today
If your Medeco cylinder is binding, your restricted key won’t turn, or you need a rekey after a tenant change, call (866) 497-9415. We’ll quote the full price before we dispatch, and same-day Medeco service is available across Ontario for urgent calls.
Written by Gil Tanner, Owner at Greystone Locksmith, serving Ontario and the Inland Empire since he picked up the trade through the vocational program at Riverside City College.