Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateMedeco Locksmith in Altadena, CA | Greystone Locksmith
Greystone Locksmith provides independent Medeco service across Altadena’s 91001 and 91003 ZIP codes – rekeys, cylinder rebuilds, deadbolt installations, and lock changes on Maxum, KeyMark, and original high-security pin-tumbler lines. What makes our Medeco work different here is straightforward: Altadena’s housing stock is old enough that most Medeco hardware gets retrofitted into century-old door prep, and that’s not a job you learn from a manual. We’re a full-spectrum locksmith shop that works on the lock in front of us, whether it’s a 1920s mortise body or a brand-new Maxum deadbolt. Call (866) 497-9415 for a free estimate – we’ll tell you exactly what your Medeco hardware needs before anyone rolls a truck.
—
Why Altadena Residents Choose Us for Medeco Service
Medeco isn’t a lock you can fumble through. The restricted keyway, the sidebar, the tight pin tolerances – miss one detail and you’ve got a cylinder that binds, a key that won’t seat, or a deadbolt that throws halfway and stops. High-security hardware like Medeco and Abloy requires a locksmith who knows it cold. That’s us. We service Medeco Maxum deadbolts, KeyMark and KeyMark XT restricted-keyway cylinders, the original 5- and 6-pin high-security pin-tumbler cylinders, and Maxum Smart / eCylinder electronic retrofits. We’re not guessing at unfamiliar hardware. We’re also not pretending to be something we’re not: Greystone Locksmith is an independent Medeco service provider – not authorized, sponsored, or endorsed by Medeco. That independence means we recommend what’s right for the lock, not what a brand program tells us to push. Gil Tanner, our owner, came up through Riverside City College’s vocational program and has spent nearly three decades working locks. The lesson that stuck: a locksmith is really just a problem-solver who happens to carry better tools. That’s how we approach every Medeco job in Altadena – solve the problem, explain what we did, hand you the invoice.
—
Styles & brands we work with







Common Medeco Locksmith Problems We Solve in Altadena
How much does Medeco repair cost in Altadena?
Medeco service in Altadena typically runs $95 – $185 for a teardown, clean, and rekey of an existing cylinder, and $240 – $420 for a full Maxum deadbolt supply-and-install. Retrofit work – fitting a Medeco cylinder into an original mortise body – can push toward the higher end depending on what the vintage hardware needs. The full price gets quoted on the phone before dispatch, and that’s the price on the invoice. No arrival surcharge. Call (866) 497-9415 for an exact quote.
Here’s what we regularly see on Medeco hardware in Altadena:
- Santa Ana grit in the pin chambers. The dry-season winds off the San Gabriels carry fine dust that packs into an exposed Medeco cylinder. The restricted key starts binding, then won’t seat at all. We pull the cylinder, clean every pin chamber, and replace any pins that show wear – not just blow it out with lubricant, which makes the grit slurry worse.
- Seasonal door warp throwing off the bolt alignment. Altadena’s hot, dry summers and occasional Santa Ana winds warp solid-wood Craftsman doors. A Medeco deadbolt that threw cleanly in spring binds against the strike by August. We adjust the strike, reset the bolt alignment, and – where the door has moved past adjustment – tell you honestly whether the fix is shimming the hinge or re-drilling the strike.
- Worn pins and seized sidebars in decades-old retrofits. We see plenty of Medeco cylinders fitted into original mortise bodies twenty or thirty years ago. The pins wear, the restricted sidebar stops releasing cleanly, and the key jams halfway in. These jobs need a full teardown and rebuild, not a new cylinder forced into an opening that was never meant for one.
- Post-Eaton Fire recovery work in 91001. Homes that sat vacant or damaged after the 2025 Eaton Fire come back with Medeco hardware fouled by ash, drywall dust, and debris. A squirt of lubricant won’t fix that. We do a full teardown, cleaning, and rekey so the lock works like it should while the owner rebuilds the rest of the house.
- Keys that can’t be duplicated at the hardware store. Medeco’s whole point is restricted keyways – you can’t walk into a big-box store and get a copy. People lose keys, need new authorized users, or buy a house and realize the previous owner kept a spare. We cut and register keys properly, so you know exactly who has access and who doesn’t.
—
Medeco Service in Altadena: What Local Conditions Mean for Your Equipment
Here’s the thing most Medeco service pages won’t tell you, because it’s specific to this town: in the Altadena foothills, many Craftsman-era homes still run their original skeleton-key mortise locks. That means Medeco work here routinely means fitting a restricted high-security cylinder into a century-old mortise body instead of simply bolting on a new deadbolt – a job that barely comes up in neighboring Pasadena’s newer condos and apartments, and one that requires real care with the original millwork. On a Craftsman bungalow off East Altadena Drive, the homeowner’s Medeco cylinder had been fitted into the original mortise lock decades earlier and finally seized after a summer of dry heat and wind-blown grit. We pulled the mortise body, rebuilt the pin stack and sidebar, cleaned and re-lubed the works, and re-fit it to the door with a fresh strike adjustment so the restricted key threw cleanly again – all without touching the original millwork. That’s the difference between a locksmith who knows Medeco and a locksmith who knows Altadena. You need both on this job.
A lock is only as good as the installation behind it. In Altadena, that installation is often a hundred years old.
—
Medeco Models & Products We Service in Altadena
We carry genuine Medeco cylinders, pins, and key blanks, and we stock the common repair parts locally so Altadena callouts don’t stall waiting on a shipment. The lines we service:
- Medeco Maxum residential deadbolt – the workhorse high-security deadbolt, usually the right call for front and back entries.
- Medeco KeyMark and KeyMark XT – restricted-keyway cylinders used in commercial and multifamily settings, where key control actually matters.
- Medeco original high-security pin-tumbler cylinders – the 5- and 6-pin classics, still in more doors than most people realize, especially older installations.
- Medeco Maxum Smart / eCylinder electronic retrofits – electronic cylinders that bring access control to existing lock hardware without replacing the whole lock.
We use genuine Medeco parts wherever they exist. Where OEM doesn’t make something for the vintage door prep we’re working on – reinforcement plates, strike hardware – we use quality aftermarket components that fit the existing millwork properly. And we repair a Medeco cylinder that’s serviceable. We’ll tell you plainly when replacement is the honest call, and why. Rekeying is often the smarter move – we’ll tell you which is right for your situation. Our Medeco sales & service work spans everything from a simple rekey to a full high-security retrofit.
—
Medeco Service Pricing in Altadena
Medeco service in San Marino costs more than basic Kwikset or Schlage service for the same reason: the cylinders, pins, and key blanks are proprietary – and because Altadena’s older housing stock often adds retrofit labor that newer construction doesn’t. Here’s the honest breakdown, and this is the same price structure we quote on the phone:
| Service | Typical Range |
|---|---|
| Medeco cylinder teardown, clean, and rekey | $95 – $185 |
| Medeco Maxum deadbolt supply and install | $240 – $420 |
| KeyMark / KeyMark XT cylinder service | $150 – $275 per cylinder |
| Electronic eCylinder retrofit labor | $110 – $190 plus hardware |
| Mortise-body rebuild with Medeco retrofit | $180 – $350 depending on vintage parts |
What drives the price in Altadena specifically? The age of the door prep beneath the Medeco cylinder. A clean, modern door is a straight swap – fast and predictable. A 1920s mortise body with a Medeco cylinder retrofitted into it takes time, care, and sometimes custom-fitting strike hardware so the restricted key throws correctly without wrecking the original wood. That’s labor, not parts markup. Every estimate is free, and the price we quote on the phone is the price on the invoice. No call-out surcharge added when we arrive. Call (866) 497-9415 and we’ll give you a firm number before dispatch.
—
Serving Altadena, CA — Our Local Coverage Area
We’re based in the Altadena area and know this community well, just as we provide Medeco in La Cañada Flintridge. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Medeco Locksmith in Altadena
Yes, we service Medeco Maxum deadbolts regardless of who installed them or when. The first thing we do is verify the cylinder condition, pin state, and bolt alignment, then we rekey or rebuild as needed. A key control issue with a previous owner’s Maxum is a common reason Altadena homebuyers call us – we rekey every exterior lock on day one of ownership when we can, and we’ll walk you through why that matters.
No. Greystone Locksmith is an independent Medeco service provider – we are not authorized, sponsored, or endorsed by Medeco. What that means for you: we can service your existing Medeco hardware, source genuine Medeco parts, and rekey or repair without being tied to a brand program. Our loyalty is to the lock in front of us, not a distribution agreement.
We use genuine Medeco cylinders, pins, and key blanks wherever they exist. The only time we use aftermarket hardware is for components like strike plates or reinforcement hardware where Medeco doesn’t make a part that fits Altadena’s older door prep. We’ll tell you exactly which parts are going into the job before we install them.
A standard rekey or cylinder teardown on a Medeco lock takes 30 to 60 minutes once we’re on site. Retrofit work into an original mortise body can take two to three hours depending on what the vintage hardware needs – those jobs are scheduled, not rushed. We give you a time estimate on the phone when you call (866) 497-9415, and we hold to it.
Most Medeco jobs in Altadena fall between $95 and $420 depending on the work: a rekey is at the lower end, a full Maxum deadbolt install at the higher end, and a century-old mortise-body rebuild somewhere in between. The price is quoted on the phone before dispatch, it includes labor and parts, and it’s the price on the invoice – no arrival surcharge. Call (866) 497-9415 for a free estimate; we’d rather tell you the number than make you guess.
—
Service Areas Near Altadena
Our Medeco work covers Altadena service area plus nearby communities including Riverside, Woodcrest, Highgrove, and Rubidoux. We also run Medeco callouts for Medeco service in Cudahy and Medeco service in Maywood – same independent approach, same straight pricing, same respect for old hardware.
—
Book Your Medeco Service in Altadena Today
Medeco work in Altadena is not a job to put off – a binding cylinder or a rekey after a property transfer only gets worse with time. Call (866) 497-9415 for a free estimate. Same-day availability for most rekeys and cylinder teardowns, and we’ll quote the full price before we dispatch. Locked out or locking down – Greystone handles both.
Written by Gil Tanner, Owner at Greystone Locksmith, serving Altadena since day one of our independent Medeco service work.